학생용
Chevron Left
The Arduino Platform and C Programming(으)로 돌아가기

캘리포니아 대학교 어바인 캠퍼스의 The Arduino Platform and C Programming 학습자 리뷰 및 피드백

4.7
별점
6,211개의 평가
1,392개의 리뷰

강좌 소개

The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment). You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums. Upon completing this course, you will be able to: 1. Outline the composition of the Arduino development board 2. Describe what it means to program the board's firmware 3. Read board schematics 4. Install Arduino IDE 5. Describe what "shields" are and how they are used 6. Specify the role of libraries in the use of shields 7. Compile and run a program 8. Name C Variables and Types 9. Name common C operators 10. Use conditionals and loops 11. Explain functions, their definition and invocation 12. Explain the implications of global variables 13. Undertake the Arduino build process 14. Describe the role of the tools behind the IDE 15. Describe how to invoke functions in classes 16. Explain the structure of an Arduino sketch 17. Access the pins of the Arduino 18. Differentiate between digital and analog pin 19. Debug embedded software 20. Explain the importance of controllability and observability in the debugging process 21. Describe common debugging architectures for embedded systems 22. Explain how the UART Serial communication protocol works 23. Describe how the Arduino Serial library performs serial communication...

최상위 리뷰

MR
2016년 8월 8일

A very good course to teach you the basics of Arduino platform and IDE. It'll help you get started on how to code your programs and lets you build up on it. I'd definitely recommend for a beginner.

MK
2017년 8월 6일

very good course to have basic understanding of C programming software , Arduino software which is explained in a very simple language where i was finding difficult before attending this course

필터링 기준:

The Arduino Platform and C Programming의 1,375개 리뷰 중 1076~1100

교육 기관: Marco a A D

2020년 6월 8일

basics for arduino programming. some middle abilities were not included. although good course.

교육 기관: carl d P

2015년 10월 29일

Good beginners and introductory course to Arduino and C. Prof. Harris is a brilliant lecturer.

교육 기관: velma r r

2016년 10월 10일

explanation is nice ,.it will be help full if practical implementation is shown using videos

교육 기관: YACOUBOU A

2020년 7월 4일

that is good for not only a beginners but also for arduino programmers to understand clearly

교육 기관: Sandeep S

2020년 5월 16일

good one, more to be focused on programing of arduino, syntax, and working of serial monitor

교육 기관: Deepak C

2017년 5월 20일

It was fun and informative. If it was more of a handson tutorial, it would have been nice.

교육 기관: Nicolas P

2015년 11월 2일

A good introduction to the Arduino platform. Looking forward to attending the next course.

교육 기관: SASI K P

2018년 7월 7일

The course is overall good. I would recommend some extra content to be covered in videos.

교육 기관: Ahmed I

2016년 10월 12일

The course is good but little bit theoretical for science that should be 80% practical .

교육 기관: Christian D

2016년 2월 21일

Good but a lot of technical parts all though they are discounted as not needed to know!

교육 기관: Joan M

2016년 6월 3일

Wonderful I'm getting further in the mastery of the IOT knowledge for my future ideas.

교육 기관: Fabian R H

2020년 6월 27일

It's a good introduction but I think the course must have works and test, but its ok

교육 기관: IMAD E M

2017년 3월 23일

Amazing course, gives your a good introduction to arduino platform and C programming

교육 기관: Muhammad I

2020년 7월 7일

i prefer this course for those newbies who step into the IoT world . awesome course

교육 기관: mohit g

2020년 6월 16일

Almost up to mark course but i think it should have taken some more deep knowledge.

교육 기관: Frank M

2016년 7월 29일

Needs more than 4 weeks worth of material. Assignments and quizzes should be free.

교육 기관: Ashvini K S

2016년 3월 17일

awesome course... but some more program and there implementation should be provided

교육 기관: Naoufal M

2020년 6월 13일

Very interesting course, thanks a lot to Ian for the quality of explanations given

교육 기관: Angela V

2019년 8월 10일

The Serial section (UART) was not that clear and osme of the links are not updated

교육 기관: Excel K H P

2020년 9월 16일

It's a good first step to get you started on getting your Arduino up and running.

교육 기관: RAKSHIT B

2020년 7월 13일

Theory was great , more practical demonstrations can be added to make it better.

교육 기관: Spurthi.M

2020년 6월 29일

A very good platform given to the students to learn out of the box knowledge..!!

교육 기관: Sachin A

2020년 5월 20일

I learnt a lot in this course. Thank you Coursera for providing me the platform.

교육 기관: Prayag S

2019년 8월 9일

THE COURSE WAS GREAT.IT WOULD BE BETTER IF THERE WAS SOME CHALLENGING QUESTIONS

교육 기관: Abhishek T

2019년 1월 29일

Really nice and teaching and practical explanation is excellent and thank you:)