Chevron Left
FPGA Capstone: Building FPGA Projects(으)로 돌아가기

콜로라도 대학교 볼더 캠퍼스의 FPGA Capstone: Building FPGA Projects 학습자 리뷰 및 피드백

4.8
별점
14개의 평가
•
5개의 리뷰

강좌 소개

This course will give you hands-on FPGA design experience that uses all the concepts and skills you have developed up to now. You will need to purchase a DE10-Lite development kit. You will setup and test the MAX10 DE10-Lite board using the FPGA design tool Quartus Prime and the System Builder. You will: Design and test a Binary Coded Decimal Adder. Design and test a PWM Circuit, with verification by simulation. Design and test an ADC circuit, using Quartus Prime built-in tools to verify your circuit design. Create hardware for the NIOS II soft processor, including many interfaces, using Qsys (Platform Designer). Instantiate this design into a top-level DE10-Lite HDL file. Compile your completed hardware using Quartus Prime. Enhance and test a working design, using most aspects of the Quartus Prime Design Flow and the NIOS II Software Build Tools (SBT) for Eclipse. Create software for the NIOS II soft processor, including many interfaces, using Qsys (Platform Designer) and the SBT. Compile your completed software using the SBT. Use Quartus Prime to program both the FPGA hardware configuration and software code in you DE10-Lite development kit. Record all your observations in a lab notebook pdf. Submit your project files and lab notebook for grading. This course consists of 4 modules, approximately 1 per week for 4 weeks. Each module will include an hour or less of video lectures, plus reading assignments, discussion prompts, and project assignment that involves creating hardware and/or software in the FPGA....

최상위 리뷰

DK

2021년 5월 28일

Requires knowledge of FPGA design flow (make sure to take 3 courses before this one), great practical tasks that complete the whole specialization.

OS

2021년 1월 27일

This specialization has a very good balance between deepness and breadth of transmitted knowledge. Thank you !

필터링 기준:

FPGA Capstone: Building FPGA Projects의 5개 리뷰 중 1~5

교육 기관: Christian L

•

2022년 1월 26일

In general a good course structure and content. It lacks support on question and exercises.

교육 기관: Dmitry K

•

2021년 5월 29일

Requires knowledge of FPGA design flow (make sure to take 3 courses before this one), great practical tasks that complete the whole specialization.

교육 기관: Ovidiu S

•

2021년 1월 28일

This specialization has a very good balance between deepness and breadth of transmitted knowledge. Thank you !

교육 기관: Carlos M

•

2021년 4월 14일

Excellent course.

교육 기관: Molin D

•

2020년 12월 31일

This is a good course.

For some reason, I am looking for a course based on Xilinx FPGA. this one is based on Altera/Intel FPGA

Coursera Footer

경력을 시작하거나 쌓기

인기 있는 주제 찾아보기

인기 강좌 및 문서

온라인으로 학위 또는 자격증 취득

Coursera

커뮤니티

기타

어디에서나 학습
앱스토어에서 다운로드하기구글 플레이에서 받기
Placeholder