이 강좌에 대하여

최근 조회 26,593
공유 가능한 수료증
완료 시 수료증 획득
100% 온라인
지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.
다음 특화 과정의 4개 강좌 중 3번째 강좌:
유동적 마감일
일정에 따라 마감일을 재설정합니다.
고급 단계
완료하는 데 약 25시간 필요
영어
자막: 영어

배울 내용

  • Explore toolpaths for CNC Lathes.

  • Identify a lathe coordinate system.

  • Choose lathe specific tools.

  • Create turning toolpaths.

귀하가 습득할 기술

Manufacturing Process ManagementManufacturing processComputer-Aided ManufacturingAutodesk Fusion 360Mechanical Engineering
공유 가능한 수료증
완료 시 수료증 획득
100% 온라인
지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.
다음 특화 과정의 4개 강좌 중 3번째 강좌:
유동적 마감일
일정에 따라 마감일을 재설정합니다.
고급 단계
완료하는 데 약 25시간 필요
영어
자막: 영어

제공자:

Autodesk 로고

Autodesk

강의 계획 - 이 강좌에서 배울 내용

1

1

완료하는 데 6시간 필요

Setting up and Cutting a Profile

완료하는 데 6시간 필요
21개 동영상 (총 77분), 8 개의 읽기 자료, 2 개의 테스트
21개의 동영상
Get the software2m
Fusion UI Update4m
Week 1 overview38
CNC Lathe coordinate systems5m
Setting up stock for a CNC lathe3m
Identifying on screen stock visualization2m
Identifying specific lathe tools5m
Lathe tool location and orientation6m
Creating a lathe tool in Fusion 3606m
Creating a basic external roughing turning toolpath9m
Exploring external finishing options for turning profile5m
Using turning profile on internal geometry7m
Getting a profile toolpath to drop into a radial groove3m
Profile leads and transitions5m
Practice exercise 1 video instructions16
Practice exercise 1 solution1m
Week 1: Practice exercise 2 video instructions16
Practice exercise 2 solution2m
Practice exercise 3 video instructions16
Practice exercise 3 solution1m
8개의 읽기 자료
Setting up and Cutting a Profile resources2m
About the discussion forum10m
Online learning communities and social media10m
Disclaimer about Autodesk Fusion 360 User Interface2m
Practice exercise 1 instructions30m
Practice exercise 2 instructions30m
Practice exercise 3 instructions30m
Week 1 challenge exercise2시간
2개 연습문제
Pre-course questions10m
Week 1 quiz10m
2

2

완료하는 데 5시간 필요

Internal and External Grooving Toolpaths

완료하는 데 5시간 필요
18개 동영상 (총 69분), 5 개의 읽기 자료, 1 개의 테스트
18개의 동영상
Using the single groove toolpath in Fusion 3607m
Turning groove for external roughing5m
Turning groove for internal roughing7m
Duplicated toolpaths to reuse parameters and selections7m
Creating an operation to rough and finish3m
Finishing internal grooves3m
Addressing collisions in a file2m
Creating a CAM setup2m
Roughing and finishing a part8m
Parting and simulating7m
Outputting G-code5m
Practice exercise 1 video instructions17
Practice exercise 1 solution1m
Practice exercise 2 video instructions16
Practice exercise 2 solution1m
Practice exercise 3 video instructions15
Practice exercise 3 solution1m
5개의 읽기 자료
Internal and External Grooving Toolpaths resources2m
Practice exercise 1 instructions30m
Practice exercise 2 instructions10m
Practice exercise 3 instructions30m
Week 2 challenge exercise2시간
1개 연습문제
Week 2 quiz5m
3

3

완료하는 데 5시간 필요

Threading and Chamfering for Turning

완료하는 데 5시간 필요
19개 동영상 (총 72분), 5 개의 읽기 자료, 1 개의 테스트
19개의 동영상
Removing or adding chamfers to a model3m
Cutting chamfers with turning toolpaths6m
Roughing and finishing a simple part6m
Model prep to remove threads5m
Create an external thread cutting toolpath8m
Create more external thread cutting toolpaths2m
Drilling on the axis of revolution6m
Creating a rigid tapping toolpath4m
Creating a C-axis drilling and tapping toolpath7m
Creating a C-axis milling toolpath with live tooling5m
Creating a toolpath pattern2m
How to post code with C-axis live tooling5m
Practice exercise 1 video instructions15
Practice exercise 1 solution40
Practice exercise 2 video instructions15
Practice exercise 2 solution3m
Practice exercise 3 video instructions16
Practice exercise 3 solution2m
5개의 읽기 자료
Threading and Chamfering for Turning resources2m
Practice exercise 1 instructions30m
Practice exercise 2 instructions30m
Practice exercise 3 instructions30m
Week 3 challenge exercise2시간
1개 연습문제
Week 3 quiz5m
4

4

완료하는 데 10시간 필요

CNC Lathe Stock Handling

완료하는 데 10시간 필요
19개 동영상 (총 81분), 5 개의 읽기 자료, 3 개의 테스트
19개의 동영상
Roughing and finishing the outside of an adapter7m
Roughing and finishing the inside of an adapter8m
Manual stock flips4m
Using multiple lathe spindles4m
Parting without edge cleanup2m
Parting with edge cleanup3m
Parting with stock transfer3m
Using profile to finish a part11m
Creating basic turning toolpaths5m
Preparing for a milling setup6m
Create milling toolpaths7m
Using stock for rest machining8m
Practice exercise 1 video instructions16
Practice exercise 1 solution1m
Practice exercise 2 video instructions16
Practice exercise 2 solution1m
Practice exercise 3 video instructions15
Practice exercise 3 solution1m
5개의 읽기 자료
CNC Lathe Stock Handling resources2m
Practice exercise 1 instructions30m
Practice exercise 2 instructions30m
Practice exercise 3 instructions30m
Week 4 challenge exercise2시간
2개 연습문제
Week 4 quiz5m
Course assessment30m

검토

CREATING TOOLPATHS FOR A CNC LATHE의 최상위 리뷰

모든 리뷰 보기

Autodesk CAD/CAM for Manufacturing 특화 과정 정보

Manufacturers are under more pressure than ever to deliver better products faster, at lower cost, and with less waste. The “throw-it-over-the-wall” approach to product development worked well enough in the past. But to compete in the future, you’ll need to connect and automate design and manufacturing processes. Bringing the studio and shop floor together can reduce iterations and errors, enabling you to deliver better products faster. Computers can handle complex tasks to achieve things that are time consuming or in some cases impossible for the human mind. This is the case when we use digital data to create complex tool motions. As we learn how to use technology in this way, we unlock the potential of computer aided manufacturing (CAM). Through this specialization, you'll learn the foundations of CAD and toolpath generation, while developing your technical skills in Autodesk® Fusion 360™. Plus, by completing this Specialization, you’ll unlock an Autodesk Credential as further recognition of your success! The Autodesk Credential comes with a digital badge and certificate, which you can add to your resume and share on social media platforms like LinkedIn, Facebook, and Twitter. Sharing your Autodesk Credential can signal to hiring managers that you’ve got the right skills for the job and you’re up on the latest industry trends like CAD and CAM....
Autodesk CAD/CAM for Manufacturing

자주 묻는 질문

  • 강의 및 과제 이용 권한은 등록 유형에 따라 다릅니다. 청강 모드로 강좌를 수강하면 대부분의 강좌 자료를 무료로 볼 수 있습니다. 채점된 과제를 이용하고 수료증을 받으려면 청강 도중 또는 이후에 수료증 경험을 구매해야 합니다. 청강 옵션이 표시되지 않는 경우:

    • 강좌에서 청강 옵션을 제공하지 않을 수 있습니다. 대신 무료 평가판을 사용하거나 재정 지원을 신청할 수 있습니다.
  • 강좌를 등록하면 전문 분야의 모든 강좌에 접근할 수 있고 강좌를 완료하면 수료증을 취득할 수 있습니다. 전자 수료증이 성취도 페이지에 추가되며 해당 페이지에서 수료증을 인쇄하거나 LinkedIn 프로필에 수료증을 추가할 수 있습니다. 강좌 내용만 읽고 살펴보려면 해당 강좌를 무료로 청강할 수 있습니다.

  • 구독하는 경우, 취소해도 요금이 청구되지 않는 7일간의 무료 평가판을 이용할 수 있습니다. 해당 기간이 지난 후에는 환불이 되지 않지만, 언제든 구독을 취소할 수 있습니다. 전체 환불 정책 보기.

  • 예, Coursera에서는 수업료를 낼 수 없는 학습자를 위해 재정 지원을 제공합니다. 왼쪽에 있는 등록 버튼 아래 재정 지원 링크를 클릭하면 지원할 수 있습니다. 신청서를 작성하라는 메시지가 표시되며 승인되면 알림을 받습니다. 성취 프로젝트를 포함하여 전문 분야의 각 강좌에서 이 단계를 완료해야 합니다. 자세히 알아보기.

  • Visit this page to learn how to download Fusion 360 and to learn about the Autodesk Education license terms.

  • Professionals can purchase an annual or monthly commercial subscription to Fusion 360. For more information, visit the Fusion 360 subscribe page.

    Fusion 360 is also available for free to all users as a 30-day trial.

  • Yes! You'll earn a Course Certificate from Coursera and Autodesk upon completing this course, including all graded assignments.

    If you'd like to earn additional recognition from Autodesk, consider enrolling in Autodesk's CAD/CAM for Manufacturing. By completing this Specialization, you’ll unlock an Autodesk Credential as further recognition of your success! The Autodesk Credential comes with a digital badge and certificate, which you can add to your resume and share on social media platforms like LinkedIn, Facebook, and Twitter. Sharing your Autodesk Credential can signal to hiring managers that you’ve got the right skills for the job and you’re up on the latest industry trends.

  • Fusion 360 is both Mac and PC compatible. System requirements can be found here.

  • Installation support for Fusion 360 can be found in the Autodesk Knowledge Network.

  • The Autodesk Fusion 360 gallery is a great resource for design inspiration. With Fusion 360, file sharing is easy. Follow the instructions for sharing a file in Fusion 360 and share your design in the gallery.

    Instructions.

    Gallery.

  • The Autodesk Certified User program offers students an opportunity to validate their Fusion 360 skills to prepare for professional careers in design and engineering. The certification exam is offered through 14,000 Certiport Testing Centers, and is available to students, educators, and professionals. To learn more about the Autodesk Certified user certification, visit www.certiport.com/acu.

  • If you are ready to learn new skills, build important relationships, and gain practical experience, then it’s time to embark on your path to becoming an Autodesk Student Expert. Start by entering the Student Expert Orientation.

  • Yes, you do have the option to audit the courses in this specialization, subject to Coursera's terms. Please note you must audit each course individually.

    When you audit a course: You'll be able to see most of the course materials for free, but you won't be able to submit assignments or get grades for your work. You won't be able to submit assignments for feedback or a grade. You also won't get a Course or Specialization Certificate.

    Visit the Coursera Help Center to learn more about auditing a course.

  • 이 강좌는 대학 학점을 제공하지 않지만, 일부 대학에서 선택적으로 강좌 수료증을 학점으로 인정할 수도 있습니다. 자세한 내용은 해당 기관에 문의하세요. Coursera의 온라인 학위Mastertrack™ 수료증은 대학 학점을 취득할 기회를 제공합니다.

궁금한 점이 더 있으신가요? 학습자 도움말 센터를 방문해 보세요.