About this Course
4.7
651개의 평가
125개의 리뷰

다음의 3/4개 강좌

100% 온라인

지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.

탄력적인 마감일

일정에 따라 마감일을 재설정합니다.

초급 단계

완료하는 데 약 25시간 필요

권장: 7 hours/week...

영어

자막: 영어

귀하가 습득할 기술

Cash FlowCostCost ControlCost Estimate

다음의 3/4개 강좌

100% 온라인

지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.

탄력적인 마감일

일정에 따라 마감일을 재설정합니다.

초급 단계

완료하는 데 약 25시간 필요

권장: 7 hours/week...

영어

자막: 영어

강의 계획 - 이 강좌에서 배울 내용

1
완료하는 데 16분 필요

Construction Cost Estimating and Cost Control Overview

Professor Odeh describes the course and provides an overview of what will be covered. Also covered is an introduction to Construction Cost Estimating and Cost Controls. ...
1 video (Total 11 min)
완료하는 데 27분 필요

Understanding Design in the Construction Industry

Ian Taylor, project manager for Turner and Townsend, introduces the stages of design in a construction project. ...
1 video (Total 12 min), 1 quiz
1개의 동영상
1개 연습문제
Understanding Design10m
완료하는 데 3시간 필요

Introduction to the Types of Cost Estimates

Professor Odeh describes the types of cost estimates in a construction project. Also covered in this module are the tools and methods used to create estimates. ...
3 videos (Total 30 min), 2 quizzes
3개의 동영상
Cost Indices10m
Cost-Capacity Factor11m
1개 연습문제
Cost Estimates Quiz10m
완료하는 데 2시간 필요

Quantity Take-Off and Measurement

James Sneath, Associate Director of Cost Management for Turner and Townsend, and Ian Taylor, Project Manager for Turner and Townsend, discuss Quantity Take Off and Measurement. Estimating cut and fill costs is taught along with a detailed example of using cut and fill software. Also covered in this module is the topic of deep foundations, concrete foundations and structural steel, measurement, masonry, glass curtain wall, facade and wall finishes....
14 videos (Total 116 min), 1 quiz
14개의 동영상
Facade / Wall Finishes / Measurement Overview9m
Cut and Fill Process and Equipment5m
Cut and Fill Takeoff5m
Cut and Fill Software5m
Introduction to Deep Foundations8m
Concrete Foundation and Concrete Properties13m
Concrete Formwork6m
Concrete Takeoff: Parking Lot Example7m
Concrete Takeoff: Skyscraper Example9m
Quantifying rebar Walkthrough6m
History of Structural Steel10m
Steel Sections in Design9m
Structural Steel Takeoff Example9m
1개 연습문제
Quantity Take-Off and Measurement14m
2
완료하는 데 1시간 필요

Pricing

James Sneath, Associate Director of Cost Management for Turner and Townsend, discusses pricing, labor costs and equipment costs. Topics include, cost materials, formwork, reinforcing steel and concrete. Money component and productivity component is discussed in labor costs, as well as estimating equipment costs....
5 videos (Total 58 min), 1 quiz
5개의 동영상
Concrete Material: Reinforcing Steel and Concrete4m
Money Component6m
Productivity Component and Examples13m
Estimating Equipment Costs12m
1개 연습문제
Pricing18m
완료하는 데 1시간 필요

Building the Estimate

James Sneath, Associate Director of Cost Management at Turner and Townsend, Inc., illustrates how to build an estimate. Sneath does a deep dive into a schematic design project. ...
6 videos (Total 53 min), 1 quiz
6개의 동영상
Design Estimate project8m
Schematic Design Estimate Demo9m
Schematic Design: A Deeper Dive4m
Building and Finalizing the Estimate9m
Checks and Due Diligence10m
1개 연습문제
Building the Estimate8m
완료하는 데 1시간 필요

Procurement

James Sneath, Associate Director of Cost Management for Turner and Townsend, discussed the procurement stage of a construction projects and they typical involvement of a cost manager or cost estimator. ...
2 videos (Total 20 min), 1 quiz
2개의 동영상
Bid Stage, Bid Returns and Levelling12m
1개 연습문제
Procurement14m
완료하는 데 1시간 필요

Post Contract and Cost Estimation within a Project

James Sneath, Associate Director of Cost Management for Turner and Townsend Construction, discusses post contract and cost estimation with a construction project. Also covered in this module are cost reporting, change orders and communication and meetings....
3 videos (Total 35 min), 1 quiz
3개의 동영상
Cost Reporting Examples13m
Change Orders and Communication7m
1개 연습문제
Post-Contract Quiz12m
3
완료하는 데 1시간 필요

Construction Cost Control Methods

Professor Odeh introduces construction cost control and the work segments contained in a project. ...
2 videos (Total 20 min), 1 quiz
2개의 동영상
Defining Methods of Cost Control12m
1개 연습문제
Cost Control10m
완료하는 데 3시간 필요

Earned Value Method (EVM)

In this module, Professor Odeh goes deeper into the Earned Value Method of Cost Control. ...
5 videos (Total 57 min), 2 quizzes
5개의 동영상
EVM Parameters11m
Performance Examples11m
EVM Favorable Performance12m
Calculating EVM12m
1개 연습문제
Earned Value Method10m
완료하는 데 29분 필요

Close Out Period

Ian Taylor, Project Manager at Turner and Townsend, Inc., introduces cost management close out and punch-list review. ...
2 videos (Total 19 min), 1 quiz
2개의 동영상
Close Out Activities13m
1개 연습문제
Close Out Period10m
완료하는 데 1시간 필요

Cost Estimation in Practice

James Sneath, Associate Director of Cost Management at Turner and Townsend, Inc., talks about cost estimation in general practice. The unit starts with tips in cost estimating and cost management and ends with a discussion of the international roles of cost managers. ...
3 videos (Total 26 min), 1 quiz
3개의 동영상
Tips in Cost Estimating and Cost Management9m
Roles and Responsibilities of Cost Managers9m
1개 연습문제
Cost Estimation10m
4
완료하는 데 2시간 필요

Project Cash Flow

Ben Miller, Project Manager at Gilbane Building Company, discusses contracts and cash flows. Revenues, expenses and how they impact projects as a whole will be covered....
12 videos (Total 107 min), 1 quiz
12개의 동영상
Accrual Method8m
Contractor Cash Flow6m
Charting Cash Flow3m
Calculating Billing7m
Payment Cycle6m
Payment Cycle Drivers5m
Payment Cycle Delays12m
Schedule of Value10m
Accelerating Revenue6m
Front Loading8m
Delaying Expenses15m
1개 연습문제
Project Cash Flow14m
완료하는 데 1시간 필요

Technology Trends in Cost Estimating and Cost Control

Kevin Labrecque, Senior Vice President at Harper Limbach LLC discusses technology trends in cost estimating and cost control. Topics include 5D Estimating Systems (BIM), estimating software, technology workflows, and implementation....
5 videos (Total 65 min)
5개의 동영상
Estimating Software in Action12m
Workflows15m
Implementation Perspective15m
Next Steps8m
4.7
125개의 리뷰Chevron Right

36%

이 강좌를 수료한 후 새로운 경력 시작하기

28%

이 강좌를 통해 확실한 경력상 이점 얻기

최상위 리뷰

대학: ASDec 16th 2017

I thoroughly enjoyed the detailed explanations provided by Professor Odeh and the professionals from Turner & Townsend. My most favourite part was the lectures of Sam Spata and Ben Miller.

대학: VGFeb 1st 2019

Very interesting course with substantial and important information and knowledge to get you familiar with cost estimating and cost control. Very practical and close to reality examples.

강사

Avatar

Ibrahim Odeh, Ph.D., MBA

Instructor, Department of Civil Engineering and Engineering Mechanics, Columbia University
Director of Research and Founder, Global Leaders in Construction Management

컬럼비아대학교 정보

For more than 250 years, Columbia has been a leader in higher education in the nation and around the world. At the core of our wide range of academic inquiry is the commitment to attract and engage the best minds in pursuit of greater human understanding, pioneering new discoveries and service to society....

건설 관리 전문 분야 정보

Construction Management is the planning, coordinating, and building of a project from conception to completion. This specialization is intended for Construction industry professionals, engineers, and architects looking to advance their careers. Students interested in learning about construction project management would also benefit from this specialization....
건설 관리

자주 묻는 질문

  • 강좌에 등록하면 바로 모든 비디오, 테스트 및 프로그래밍 과제(해당하는 경우)에 접근할 수 있습니다. 상호 첨삭 과제는 이 세션이 시작된 경우에만 제출하고 검토할 수 있습니다. 강좌를 구매하지 않고 살펴보기만 하면 특정 과제에 접근하지 못할 수 있습니다.

  • 강좌를 등록하면 전문 분야의 모든 강좌에 접근할 수 있고 강좌를 완료하면 수료증을 취득할 수 있습니다. 전자 수료증이 성취도 페이지에 추가되며 해당 페이지에서 수료증을 인쇄하거나 LinkedIn 프로필에 수료증을 추가할 수 있습니다. 강좌 내용만 읽고 살펴보려면 해당 강좌를 무료로 청강할 수 있습니다.

궁금한 점이 더 있으신가요? 학습자 도움말 센터를 방문해 보세요.