Chevron Left
Magnetics for Power Electronic Converters(으)로 돌아가기

콜로라도 대학교 볼더 캠퍼스의 Magnetics for Power Electronic Converters 학습자 리뷰 및 피드백

4.8
별점
64개의 평가
18개의 리뷰

강좌 소개

This course can also be taken for academic credit as ECEA 5703, part of CU Boulder’s Master of Science in Electrical Engineering degree. This course covers the analysis and design of magnetic components, including inductors and transformers, used in power electronic converters. The course starts with an introduction to physical principles behind inductors and transformers, including the concepts of inductance, core material saturation, airgap and energy storage in inductors, reluctance and magnetic circuit modeling, transformer equivalent circuits, magnetizing and leakage inductance. Multi-winding transformer models are also developed, including inductance matrix representation, for series and parallel structures. Modeling of losses in magnetic components covers core and winding losses, including skin and proximity effects. Finally, a complete procedure is developed for design optimization of inductors in switched-mode power converters.   After completing this course, you will: - Understand the fundamentals of magnetic components, including inductors and transformers - Be able to analyze and model losses in magnetic components, and understand design trade-offs  - Know how to design and optimize inductors and transformers for switched-mode power converters This course assumes prior completion of courses 1 and 2: Introduction to Power Electronics, and Converter Circuits....

최상위 리뷰

CJ
2020년 12월 17일

Straightforward presentation of magnetic concepts and development of a systematic approach that can be iterated to produce any manner of magnetic devices used in dc switching converters.

MU
2020년 12월 18일

An essential course for those looking to work as a Power Electronics engineer. Thank you to all who made this possible.

필터링 기준:

Magnetics for Power Electronic Converters의 18개 리뷰 중 1~18

교육 기관: Behzad B

2021년 4월 10일

The courses are very helpful and excellent. Though it is a shame that these courses are restricted for the people in several regions of the world due to the US gov. sanctions. I believe that learning should not be politicized.

교육 기관: Ming T

2021년 2월 23일

Teaches the methodology of specifying design needs while pairing with real world constraints to realize real designs. This field itself is presumably much deeper than what the course offers, where the professor does touch on usage of computer aided designs, but I do believe the difficulty is suitable as an entry design course and for introduction to concepts.

교육 기관: Davide C

2021년 2월 26일

The course was very interesting. It helped me to refresh lots of knowledge studied at University (Polytechnic of Milan) back in 2010. I will definitely use this knowledge in my future career as a power electronic engineer for automotive electrification.

교육 기관: Abel F

2021년 5월 7일

I really appreciated the course, many thanks for such clear and sharp lectures. That would be great if professor Robert Erickson would also focus on high power AC reactors with low operational frequency 50/60Hz (laminated core, I>1000A, etc).

교육 기관: Parth S

2020년 11월 18일

An exceptional course of the learning magnetics in power electronics. The content of course is perfect for the leaning of magnetics from the basic. The quizzes are bit tricky and you need to give more attention for the correct answers.

교육 기관: Giosuè M

2021년 8월 29일

In this course there are several basic methods to design inductors, transformers based on the applications. I appreciated the possibility to learn these methods in a very simple way. I'm very happy with it.

교육 기관: Akhil M C

2021년 1월 9일

Great course for people aspiring to learn magnetic design for power electronics. Fundamentals are clearly explained and assignment will make sure that the student acquired sufficient knowledge on the topic.

교육 기관: Cliff J

2020년 12월 18일

Straightforward presentation of magnetic concepts and development of a systematic approach that can be iterated to produce any manner of magnetic devices used in dc switching converters.

교육 기관: Hakhan O

2021년 10월 18일

Finally to be able to see that I can design a transformer, is an evidence that The course is well planned and explained.

교육 기관: Mohammad A U

2020년 12월 19일

An essential course for those looking to work as a Power Electronics engineer. Thank you to all who made this possible.

교육 기관: Chong Z

2021년 11월 15일

Dr.Robert Erickson is my mentor in this area. Very clear and impressive. Appreciate.

교육 기관: Ibrahim A D

2021년 4월 18일

More explanations or examples would help since this subject is rich in content

교육 기관: 何宇宸

2020년 12월 16일

If the course could provide solutions, that would be the icing on the cake

교육 기관: Sanjeev P C N

2020년 10월 24일

Good course on fundamentals of Magnetics for Power Electronics

교육 기관: shankar r

2021년 5월 3일

this course is especially for power electronics designer

교육 기관: César R

2020년 11월 1일

Great Course, Valuable Information!

교육 기관: kaliyappan k

2021년 5월 23일

Great

교육 기관: Andrew W

2021년 4월 4일

Interesting subject, but would have preferred more time on converter controls rather than design of magnetic components.