The drive for development of new and novel oral biomaterials has never been more important with many people using oral biomaterials today and seeing their benefits in restoring and improving their oral health for a more enjoyable lifestyle. The unique properties of biomaterials such as titanium (Ti), zirconia (ZrO2) and various polymeric materials have made them materials of choice in oral health: dental implants, oral and maxillofacial surgery, and even regenerative medicine. Oral biomaterials research today is an exciting and intensive multidisciplinary area that encompasses contributions from a wide range of fields from professional dentistry to biology, chemistry, physics, material science, and engineering.
Materials in Oral Health
홍콩 대학교이 강좌에 대하여
최근 조회 14,992회
공유 가능한 수료증
완료 시 수료증 획득
100% 온라인
지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.
유동적 마감일
일정에 따라 마감일을 재설정합니다.
완료하는 데 약 15시간 필요
영어
자막: 영어, 중국어 (간체자)
강사
공유 가능한 수료증
완료 시 수료증 획득
100% 온라인
지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.
유동적 마감일
일정에 따라 마감일을 재설정합니다.
완료하는 데 약 15시간 필요
영어
자막: 영어, 중국어 (간체자)
제공자:
홍콩 대학교
The University of Hong Kong is the territory’s oldest institute of higher learning and also an internationally recognized, research led, comprehensive university. It engages in frontier research and academic endeavours that reflect and address the needs of a fast changing, knowledge-based world.
강의 계획 - 이 강좌에서 배울 내용
완료하는 데 5시간 필요
Titanium and Ceramics
완료하는 데 5시간 필요
15개 동영상 (총 59분), 8 개의 읽기 자료, 4 개의 테스트
15개의 동영상
Welcome to WEEK 1 from HKU Dean of Dentistry54
Introduction to Dental Materials: Metals2m
Introduction of Materials used in Implants4m
What Does the Future Hold for Titanium and Its Alloys?3m
Titanium and Its Applications in Oral and Maxillofacial Surgery6m
An Introduction to Dental Materials: Ceramics, Zirconia and Alumina4m
Introduction of Ceramic Materials Used in Restorative Dentistry3m
The Development and Advantages of Glass Ceramics1m
Dental Material Choice: Zirconia vs. Titanium2m
The Challenge of Zirconia as a Dental Material: Surface Treatment2m
An Introduction to Surface Treatment Methods3m
Surface Treatment Method: Acid Etching6m
Acid Etching: Bonding to Enamel and Dentine4m
[Honors Lesson 1H] Silicon and Silicon Compounds in Dentistry11m
8개의 읽기 자료
From Chief Instructors: About the Course and Disclaimer10m
Honors Lessons (An Option for Learners)10m
The Course Syllabus, the Course Structure and Useful Information10m
Entrance Survey - Let us Know More about You10m
Lesson 1.1 Objectives and Further Reading10m
Lesson 1.2 Objectives and Further Reading10m
Lesson 1.3 Objectives and Further Reading10m
[Honors Lesson 1H] Objectives and Further Reading10m
3개 연습문제
CheckPoint 1.130m
Check Point 1.230m
Check Point 1.330m
완료하는 데 3시간 필요
Modern Composites and Cements
완료하는 데 3시간 필요
15개 동영상 (총 65분), 3 개의 읽기 자료, 3 개의 테스트
15개의 동영상
Choice of Dental Fillings: Silver or Composites4m
An Overview of Fibre-Reinforced Composite (FRC) in Dentistry5m
Fibre-Reinforced Composite (FRC) : Chemistry, Properties, Fibre Types and Orientation3m
Applications of Fibre-Reinforced Composite (FRC) in Dentistry4m
An Introduction to Dental Cements5m
Introduction to Glass Ionomer Cements (GIC) and Resin-modified Glass Ionomer Cements (RMGIC)4m
Tricalcium Silicate-based Endodontic Cements - Properties and Modifications5m
Tricalcium Silicate-based Endodontic Cements - Radiopacifier2m
Tricalcium Silicate-based Endodontic Cements - Modifications in Mixing Liquids and Additives7m
Tricalcium Silicate-based Endodontic Cements - Hydraulic Properties and Bioactivities3m
Classification and Composition of Resin Dental Adhesives6m
Resin Adhesion to Tooth Tissues4m
Indications of Resin Dental Adhesives1m
Dental Restorative Materials in Paediatric Dentistry6m
3개의 읽기 자료
Lesson 2.1 Objectives and Further Reading10m
Lesson 2.2 Objectives and Further Reading10m
Lesson 2.3 Objectives and Further Reading10m
3개 연습문제
Check Point 2.130m
Check Point 2.230m
Check Point 2.330m
완료하는 데 3시간 필요
Digital Dentistry
완료하는 데 3시간 필요
14개 동영상 (총 33분), 3 개의 읽기 자료, 3 개의 테스트
14개의 동영상
The Role of Digital Technology in Dentistry - A Message from Instructor Professor Jukka Matinlinna52
Introduction to Digital Dentistry - A Message from Instructor Dr. James Tsoi3m
3-D Digital Stereophotogrammetry38
Intraoral Scanner57
An Introduction to Oral Radiology3m
The Basic Principles of Cone Beam Computed Tomography (CBCT)6m
Cone Beam Computed Tomography (CBCT)1m
CAD/CAM Technology in Crown Fabrication – An Introduction5m
Orthodontics Diagnosis and Treatment Methods1m
Digital Dentistry in the Field of Oral and Maxillofacial Surgery2m
Digital Probing1m
Shade Matching47
3D Printing in Dentistry2m
3개의 읽기 자료
Lesson 3.1 Objectives and Further Reading10m
Lesson 3.2 Objectives and Further Reading10m
Lesson 3.3 Objectives and Further Reading10m
3개 연습문제
Check Point 3.130m
Check Point 3.230m
Check Point 3.330m
완료하는 데 4시간 필요
Lab Tests
완료하는 데 4시간 필요
9개 동영상 (총 52분), 4 개의 읽기 자료, 3 개의 테스트
9개의 동영상
Adhesion in Restorative Dentistry5m
A Finite Element Study on Dental Bond Strength Tests3m
Impact of Root Canal Irrigants on Root Filling Materials13m
Introduction to Spectroscopy7m
Surface Analysis : What is a Surface?2m
Methods to Study the Surfaces: ESCA5m
ESCA Study of Titanium13m
(4.2.3) Microtensile Bond Strength Test [A Silent Lab Demonstration]46
4개의 읽기 자료
Lesson 4.1 Objectives and Further Reading10m
Lesson 4.2 Objectives and Further Reading10m
Exit Survey: Let us know what you think about the course10m
Honors Lesson 4H Objectives and Further Reading10m
2개 연습문제
Check Point 4.130m
Check Point 4.230m
검토
MATERIALS IN ORAL HEALTH의 최상위 리뷰
SP 제공2020년 5월 12일
It was a great experience to be the part of this course as it gave me such a great knowledge about the materials used in dental field and lectures were also great to the point.
LY 제공2020년 8월 22일
Interesting and engaging course on dental health and modern technology. I didn't know so much went into dentistry and will appreciate my dental professionals better.
SV 제공2019년 6월 22일
The course was really effective with quizzes and the lecture videos were really amazing and overall had a good learning experience
SJ 제공2017년 5월 18일
I felt it could be more clinically oriented and subjects could be more elaborate. More demonstrations can also be made
자주 묻는 질문
강의 및 과제를 언제 이용할 수 있게 되나요?
강의 및 과제 이용 권한은 등록 유형에 따라 다릅니다. 청강 모드로 강좌를 수강하면 대부분의 강좌 자료를 무료로 볼 수 있습니다. 채점된 과제를 이용하고 수료증을 받으려면 청강 도중 또는 이후에 수료증 경험을 구매해야 합니다. 청강 옵션이 표시되지 않는 경우:
- 강좌에서 청강 옵션을 제공하지 않을 수 있습니다. 대신 무료 평가판을 사용하거나 재정 지원을 신청할 수 있습니다.
이 수료증을 구매하면 무엇을 이용할 수 있나요?
수료증을 구매하면 성적 평가 과제를 포함한 모든 강좌 자료에 접근할 수 있습니다. 강좌를 완료하면 전자 수료증이 성취도 페이지에 추가되며, 해당 페이지에서 수료증을 인쇄하거나 LinkedIn 프로필에 수료증을 추가할 수 있습니다. 강좌 콘텐츠만 읽고 살펴보려면 해당 강좌를 무료로 청강할 수 있습니다.
Is financial aid available?
예, Coursera는 수업료를 지급하기 어려운 학습자들에게 재정 지원을 제공합니다. 왼쪽의 "등록" 버튼 아래에 있는 재정 지원 링크를 클릭하면 재정 지원을 신청할 수 있습니다. 이 링크를 클릭하면 신청서를 작성하라는 메시지가 나타나며, 신청서가 승인되면 통지를 받게 됩니다. 자세히 알아보세요.
What is the aim of the course?
The major aim of the course is to help the students:
LEARN about important biomaterials used in oral health and their unique properties and use, UNDERSTAND the selection and clinical implications and potentials of biomaterials and technology used in dentistry, and APPLY the related knowledge, experience, challenges, and expertise in studies and research in oral biomaterials and CREATE SYNERGY in ever growing needs and contribution to tomorrow’s dentistry.
What are the contents covered in the course?
The MOOC includes 4 modules and runs over a period of 4 weeks.
You can refer to the Learning objectives page.
Week 1 reveals the unique properties and clinical implications of the much sort-after titanium and various ceramics and discusses the importance of surface treatments and modifications.
Week 2 discusses the characteristics of modern resin composites, other polymeric materials, and dental cements, looking into adhesion strength and the role of dentin bonding agents.
Week 3 explores present day and future dentistry: the increasingly popular role of digital dentistry in practice today, including CAD/CAM, crown fabrication, 3D printing and orthodontics.
Week 4 shows major research laboratory tests for testing specific mechanical properties, adhesion strength, as well as, spectroscopic techniques used in the analysis and charaacterization of biomaterials.
What is the structure of a weekly module?
Each Weekly Module is divided into 3 to 4 Lessons, depending on the content area and topics. Each Module includes Learning Objectives, Further Reading materials for the week and Discussion Prompt questions in the discussion forum.
Each individual Lesson in the Weekly Module contains 3 to 4 video lecture videos and an automated assessment of Multiple Choice questions for knowledge consolidation.
How can I get a course certificate and what is it?
You can earn official recognition for the course you take on Coursera with a Course Certificate for completing and passing course assignments and meeting the assessment standards. Please refer to details on: https://learner.coursera.help/hc/en-us/articles/208280196
Can I re-take the quiz if I did not get all questions correct?
The purpose of the quiz is to help you comprehend the lesson contents. A learner can make 3 attempts to a quiz within 1 hour.
Who are the teachers in Materials in Oral Health course?
The Teachers of the course are dental practitioners and experts in dental materials from around the world:
Professor Jukka P. Matinlinna (The University of Hong Kong)
Dr. James K. H. Tsoi (The University of Hong Kong)
Dr. Nikos Mattheos (The University of Hong Kong)
Prof. Niklaus P. Lang (The University of Hong Kong, University of Berne, Switzerland)
Dr. Justin P. Curtin (The University of Hong Kong)
Dr. Edmond H. N. Pow (The University of Hong Kong)
Prof. Timo Närhi (The University of Turku)
Dr. Hamdi H. Hamama (The University of Hong Kong)
Prof. Damien Walmsley (The University of Birmingham)
Prof. Pekka Vallittu (The University of Turku)
Prof. Cynthia K. Y. Yiu (The University of Hong Kong)
Prof. Josette Camilleri (The University of Malta)
Dr. Manikandan Ekambaram (The University of Hong Kong)
Dr. Walter Y. H. Lam (The University of Hong Kong)
Prof. Michael Bornstein (The University of Hong Kong)
Dr. Andy W. K. Yeung (The University of Hong Kong)
Dr. Henry W. K. Luk (The University of Hong Kong)
Dr. John Y. C. Wu (The University of Hong Kong)
Dr. Winnie W. S. Choi (The University of Hong Kong)
Dr. Dominic K. L. Ho (The University of Hong Kong)
Dr. Will W. Qiao (The University of Hong Kong)
Dr. Tian Tian (The University of Hong Kong)
Dr. Fabio Savoldi (The University of Hong Kong)
Dr. Xiaozhuang Jin (The University of Hong Kong)
Dr. Prasanna Neelakantan (The University of Hong Kong)
Prof. Will Palin (The University of Birmingham)
Prof. Edwin Kukk (The University of Turku)
Dr. Sari Granroth (The University of Turku)
궁금한 점이 더 있으신가요? 학습자 도움말 센터를 방문해 보세요.
