Chevron Left
Motors and Motor Control Circuits(으)로 돌아가기

콜로라도 대학교 볼더 캠퍼스의 Motors and Motor Control Circuits 학습자 리뷰 및 피드백

4.7
별점
865개의 평가
203개의 리뷰

강좌 소개

This course can also be taken for academic credit as ECEA 5341, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our second course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled Sensors and Sensor Circuits. Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. This second course assumes that you already know how to use the kit. After taking this course, you will be able to: ● Understand how to specify the proper AC or DC motor for a machine design. ● Integrate the motor to a machine, based on analysis of motor equations for voltage, current, torque and speed. ● Implement the motor and accompanying rotary sensor into a motor control circuit in both hardware and software. ● Add a motor and motor control circuit into a microprocessor based development kit. ● Create hardware and firmware to process motor feedback data to a microprocessor for further evaluation. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers for the above table, the lab on Motor Voltage and Current Measurement. You can copy and paste them into the search engine on the Digikey web site. You need one of each except for the AA batteries (N107-ND), which you would need 3. 428-3390-ND P14355-ND FQU13N10LTU-ND N107-ND 1N5393-E3/54GICT-ND RNF14FTD1K00CT-ND P0.62W-1BK-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

최상위 리뷰

LL
2020년 7월 9일

This course and lectures deliver what is promised: about AC and DC motor.\n\nIf you are looking to learn about this subject, this is one of the best online class that you can find.\n\nHappy learning!

RR
2020년 4월 9일

The course has given me a brief idea about how to choose a motor for my application. Real time application videos and laboratory exercises which really enhances the knowledge about AC and DC Motors.

필터링 기준:

Motors and Motor Control Circuits의 200개 리뷰 중 176~200

교육 기관: URMILA T

2021년 6월 4일

its a very good course

교육 기관: Prof.Rajat K M

2020년 6월 23일

Audio is not OK for me

교육 기관: Patil M

2020년 5월 21일

Thanks team cuoresa.

교육 기관: Tushar R S

2020년 9월 16일

Bestt Course!!

교육 기관: Chandini C

2020년 5월 30일

informative,

교육 기관: AVALA S

2020년 6월 17일

Informative

교육 기관: MD. R I

2020년 7월 9일

Good

:)

교육 기관: IMANDI V S K S R K

2021년 9월 20일

good

교육 기관: Deleted A

2020년 12월 31일

Ygvg

교육 기관: Nguema n

2020년 12월 15일

Good

교육 기관: 18105802 H - S E

2020년 9월 2일

Good

교육 기관: Nikhil B

2021년 10월 19일

I did not find this course to be as useful as I expected. The content is fine however the explanations by the professor lack depth. Most of the time Professor is reading the slide without explaining anything. This could be improved. Also course relies a lot on text book which has not been provided, it would be nice to provide an access to textbook (maybe only for a period of course) so that people who cant afford to rent or buy the textbook would be able to read the contents. The content and lectures can be made more engaging by including more graphics and animations.

교육 기관: Arvind S

2021년 12월 23일

very good practical information, but I would have liked some more mathematical foundation work such as reference frame theory

교육 기관: nireekshana t

2020년 8월 24일

I am unable to view and download my certificate

교육 기관: David M

2019년 12월 5일

LAB practice is not well explained

교육 기관: LINGESH S

2020년 10월 3일

Cannot able to verify my id

교육 기관: RAHUL C

2020년 7월 24일

nice coursse

교육 기관: MUNENDRA A S

2020년 9월 18일

Good

교육 기관: Saini P

2020년 7월 8일

Good

교육 기관: Adhip S

2020년 6월 8일

The course is very elementary to be called a specialization. I have also done power electronics courses by university of colorado boulder and they are built very balanced but this course is not worth giving time.

교육 기관: Chris J

2019년 6월 20일

Questions go unanswered for months on the discussion forum.

교육 기관: YADUVEER S

2019년 1월 12일

if you are electrical engineer no need to do this

교육 기관: E M K

2020년 6월 2일

not as expected its lot about definitions not theoretical course,still thank coursera for financial aid

교육 기관: DILHIWALA A R

2020년 6월 25일

i can't download my certificate and verified my id please help me to get out from this problem

교육 기관: Nader h

2020년 12월 27일

I don't receive my certificate