Chevron Left
Engineering Project Management: Scope, Time and Cost Management(으)로 돌아가기

라이스 대학교의 Engineering Project Management: Scope, Time and Cost Management 학습자 리뷰 및 피드백

635개의 평가
131개의 리뷰

강좌 소개

Scope, time, and cost management are at the heart of successful project management. This course will give you the tools to develop a project scope, schedule and budget and then status them to predict project performance. Throughout the course, you will learn about change management and techniques to implement it. By the end of this course you will be able to: • Create a requirements document • Create a Project Scope Statement • Identify ways to control the scope of the project • Decompose the work and develop work packages • Create a Work Breakdown Structure • Develop a Critical Path Schedule • Review types of cost estimates and identify whether they are “top down or bottom up” • Review budgets, contingencies and reserves • Calculate planned and earned values to compare with actual cost • Perform a cost and schedule analysis Each week you will prepare a key deliverable for the project plan based on a provided Case Study. These deliverables include: • Project Scope Statement • Project Work Breakdown Structure (WBS) and WBS dictionary • Critical Path schedule sequence diagram • Bar Chart Schedule (Gantt Chart) • Project Cost Estimate • Project Status using an Earned Value Calculation All of this will position you to set up a plan to control your next assignment or your next project whether this is as the project manager or as an area leader. Rice Center for Engineering Leadership is a Registered Education Provider through the Project Management Institute (PMI)®. Learners who complete this course on the Certificate track will be awarded 14 hours of Profession Development Units. These are recognized by PMI for continuing education or can be applied toward the 35 hours of education required for the Project Management Professional (PMP)® certification. PMI and PMP are registered marks of the Project Management Institute, Inc....

최상위 리뷰


May 29, 2018

I was very satisfied by this course contents, and also by the way of teaching of the 2 Professors. I definitely recommend it to engineers who want to increase their knowledge on project management.


May 27, 2019

Really good course especially for engineers new to the field of project management and handling. I appreciate the hard work that has been done to put this course together.\n\nThank You once again!

필터링 기준:

Engineering Project Management: Scope, Time and Cost Management의 131개 리뷰 중 1~25

교육 기관: Lynne L V

Sep 18, 2018

Hands-on real-life experience because you produce all of the work products for a project. It's a very thorough well done, professionally produced series of courses!

교육 기관: Sairam I

May 06, 2019

Great course. The Assignment helps to reinforce concepts taught.

교육 기관: Daniel G H

Sep 14, 2017




































교육 기관: Andreas H

Apr 30, 2019

The topic and the presentation is very good.

One star less because of questions/answers which are not part of the lecture.

One star less because of the rating for the assignment does not fully match (i.e. estimation: compare to the WBS and Gantt Chart but both will not be available / not be uploaded)

교육 기관: Luca G

May 27, 2019

The proposed template has different fields from the rubric, so basically it's not a template.

Don't follow it if you want to pass the assignment because if don't, there will not be anyone to correct your assignment again.

교육 기관: Muhammad A

May 27, 2019

Really good course especially for engineers new to the field of project management and handling. I appreciate the hard work that has been done to put this course together.

Thank You once again!

교육 기관: Sakti P B

Sep 21, 2017

Nicely designed and executed. Loved it.

교육 기관: Mayte R L

May 27, 2019

Great course!

교육 기관: Khadija T

May 11, 2020

Everything was good about this course, however, some people taking these types of courses are not serious and are not objective when grading the work. They would definitely give you a bad grade though you did an almost perfect job. Some of them would submit whatever work just to pass the assignment, which is really bad.

교육 기관: Muhammad S K

Aug 03, 2020

such an amazing course , learned alot from it the instructors are amazing ,Every lecture was easy to follow and understand . Little bit improvement is needed regarding discussion forum I mean to say that if a question is not answered moderators should look into it .overall i would recommend that those who want to peruse career in project management or engineering management should take this course

교육 기관: Tino B J

Dec 18, 2017

Great Instructors, Great Course, Fantastic Content and studying material. A;ll assignments from Case Study are very well thought out and instrumental for learning of concept.

I found this course to be in line of what I wanted to learn in Project Management.

Tino Bernal Janna

교육 기관: Trinanjan B

Jun 06, 2020

An important course for those who are aspiring for leading a project team or an organization who will undertake projects in various realms of today's world. What is the utility of being an engineering if you can't apply your knowledge in handling a team or a project?

교육 기관: Muhammad A

Jun 19, 2020

During this learning tenure i developed and boosted my knowledge and engineering project management skills like scope, time and cost management. I would like to suggest to my colleagues to avail this opportunity for their better career.

교육 기관: Omar P M

Dec 19, 2019

Excellent content. Beginner to intermediate level (in my opinion). Nice overview of the scope, WBS, scheduling tools, and cost estimates. Recommended 100%. A nice mix of videos, lectures, students' interaction, and assignments.

교육 기관: Joshua R

Jun 08, 2020

The instructors are well informed and experienced in project management. The assignments are appropriate to the course. Furthermore it is offered by a prestigious university which adds to your resume. 5 Stars!

교육 기관: Davide C

May 29, 2018

I was very satisfied by this course contents, and also by the way of teaching of the 2 Professors. I definitely recommend it to engineers who want to increase their knowledge on project management.


May 09, 2020

Interesting and had fun while learning the course. This will help me build my career. Thank you for the professors and the institute for offering this course.

교육 기관: Leonard H

Jul 10, 2020

Great course. This course gave me more knowledge in project management. and formulate the way we manage the scope, schedule, cost, and project control.

교육 기관: SOUMAY G

Jul 28, 2020

Peer Graded Assignment will help us, to perform our work and know different tools and techniques, software being used for project management tools

교육 기관: Bruno M M

Sep 27, 2017

Very good course, super practical which helps a lot understand the subject and how to apply techniques and methodologies. I totally recommend.

교육 기관: Wesley T

Jan 15, 2018

Great Course!

The content is up to date with market practices.

Professors know profession's day-to-day and bring greats insights for career.

교육 기관: Alberto F L

Jan 23, 2018

Very interesting and intensive course on project management. People who are really willing to commit to it will benefit immensely of it.

교육 기관: Ramiro R

Sep 13, 2017

Excellent course. Material is complete and well explained. Assignments are helpful tools to develop Project Management skills.

교육 기관: Lucas K

Feb 26, 2018

Very comprehensive with a good difficulty level. Overall the instructors are doing good, but sometimes it's a bit monotone.

교육 기관: Karan S

Jun 23, 2020

This was good course and there is detail explanation video on project which is helpful to understand the concept