About this Course
최근 조회 10,533

다음 전문 분야의 4개 강좌 중 4번째 강좌:

100% 온라인

지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.

유동적 마감일

일정에 따라 마감일을 재설정합니다.

중급 단계

완료하는 데 약 8시간 필요

권장: 4 hours/week...

영어

자막: 영어

다음 전문 분야의 4개 강좌 중 4번째 강좌:

100% 온라인

지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.

유동적 마감일

일정에 따라 마감일을 재설정합니다.

중급 단계

완료하는 데 약 8시간 필요

권장: 4 hours/week...

영어

자막: 영어

강의 계획 - 이 강좌에서 배울 내용

1
완료하는 데 2시간 필요

Root Cause Analysis

In this module, Dr. Bill Bailey will cover root cause analysis, which includes the 7-step model, counter measure, and "single-minute exchange of die" (SMED). This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous belt material. This refresher area does not serve as a "replacement" for taking the material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.

...
12 videos (Total 51 min), 5 readings, 2 quizzes
12개의 동영상
5 Whys4m
FMEA - pt15m
FMEA - pt25m
FMEA - pt36m
Introduction1m
7-Step Model4m
More Tools for Root Cause4m
Counter Measures4m
Single-minute Exchange of Die (SMED)5m
5개의 읽기 자료
Highly-Recommended Text10m
Introduction - Recommended Reading10m
7-Step Model - Recommended Reading10m
Counter Measures - Recommended Reading10m
SMED - Recommended Reading10m
2개 연습문제
Root Cause Analysis Practice Quiz20m
Root Cause Analysis Graded Quiz20m
2
완료하는 데 2시간 필요

Lean Tools

In this module, Dr. Bill Bailey will cover a more advance use of lean tools, including a look at the lean philosophy, lean goals, and lean systems. You will also be exposed to three important case studies. This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous yellow belt material. This refresher area does not serve as a "replacement" for taking the yellow belt material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.

...
17 videos (Total 79 min), 2 quizzes
17개의 동영상
Kaizan4m
Kan Ban8m
5S4m
Process Mapping - vid16m
Process Mapping - vid23m
Value Stream Mapping4m
Total Productive Maintenance, Visual Management, & SMED4m
Introduction1m
Lean Philosophy5m
Lean Goals4m
Lean Tools & Systems5m
Case Study 14m
Case Study 23m
Case Study 36m
2개 연습문제
Lean Tools Practice Quiz20m
Lean Tools Graded Quiz20m
3
완료하는 데 1시간 필요

Statistical Process Control (SPC) & Control Plan

In this module, Dr. David Cook will cover statistical process control (SPC) and control plan.

...
5 videos (Total 23 min), 2 readings, 2 quizzes
5개의 동영상
Statistical Process Control - Part 45m
Control Plan6m
2개의 읽기 자료
Statistical Process Control - Recommended Reading10m
Control Plan Recommended Reading10m
2개 연습문제
SPC and Control Plan Practice Quiz18m
SPC and Control Plan Graded Quiz20m
4
완료하는 데 1시간 필요

Lean Tools for Process Control

In this module, Dr. David Cook will cover lean tools for process control.

...
2 videos (Total 7 min), 1 reading, 2 quizzes
1개의 읽기 자료
Lean Tools and Process Control - Recommended Reading10m
2개 연습문제
Lean Tools for Process Control Practice Quiz20m
Lean Tools for Process Control Graded Quiz20m
4.6
16개의 리뷰Chevron Right

50%

이 강좌를 통해 확실한 경력상 이점 얻기

50%

급여 인상 또는 승진하기

Six Sigma Advanced Improve and Control Phases의 최상위 리뷰

대학: ELApr 29th 2018

SImplified version of the Lean Six Sigma book yet contains a significant amount of information.

대학: MFeb 21st 2019

Very Very interesting course. Deserved to be taken

강사

Avatar

David Cook, PhD

Assistant Professor of Mechanical Engineering Technology
Department of Mechanical Engineering Technology
Avatar

Bill Bailey, PhD

Assistant Professor of Industrial Engineering
Department of Systems and Industrial Engineering

조지아주립대 시스템 정보

The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System....

Six Sigma Green Belt 전문 분야 정보

This specialization is for you if you are looking to learn more about the more advanced components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance. In this specialization, you will learn proven principles and tools specific to six sigma and lean. This is a sequential, linear designed specialization that covers a more advanced level of content (at the "green belt" level) of Six Sigma and Lean. Yellow Belt knowledge is needed before advancing to Green Belt (which is the second specialization offered here on Coursera by the USG). Green Belt knowledge is needed before moving to a Black Belt. The proper sequence of this specialization is: Course #1 - Six Sigma and the Organization (Advanced) Course #2 - Six Sigma Advanced Define and Measure Phase Course #3 - Six Sigma Advanced Analyze Phase Course #4 - Six Sigma Advanced Improve and Control Phase At the end of Course #4 (Six Sigma Advanced Improve and Control Phase), there is a peer-reviewed, capstone project. Successful completion of this project is necessary for full completion of this specialization. It should be noted that completing either the Yellow Belt or Green Belt Specializations does not give the learner "professional accreditation" in Six Sigma, but should assist in better preparation for such professional accreditation testing....
Six Sigma Green Belt

자주 묻는 질문

  • 강좌에 등록하면 바로 모든 비디오, 테스트 및 프로그래밍 과제(해당하는 경우)에 접근할 수 있습니다. 상호 첨삭 과제는 이 세션이 시작된 경우에만 제출하고 검토할 수 있습니다. 강좌를 구매하지 않고 살펴보기만 하면 특정 과제에 접근하지 못할 수 있습니다.

  • 강좌를 등록하면 전문 분야의 모든 강좌에 접근할 수 있고 강좌를 완료하면 수료증을 취득할 수 있습니다. 전자 수료증이 성취도 페이지에 추가되며 해당 페이지에서 수료증을 인쇄하거나 LinkedIn 프로필에 수료증을 추가할 수 있습니다. 강좌 내용만 읽고 살펴보려면 해당 강좌를 무료로 청강할 수 있습니다.

궁금한 점이 더 있으신가요? 학습자 도움말 센터를 방문해 보세요.