이 강좌에 대하여

최근 조회 135,806
공유 가능한 수료증
완료 시 수료증 획득
100% 온라인
지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.
다음 특화 과정의 4개 강좌 중 2번째 강좌:
유동적 마감일
일정에 따라 마감일을 재설정합니다.
고급 단계
완료하는 데 약 23시간 필요
영어
자막: 영어

배울 내용

  • Create and drive a mechanical gear assembly.

  • Create and modify a form-based design.

  • Use design tools for molded parts.

  • Demonstrate proficiency in the setup and creation of a design.

귀하가 습득할 기술

AutodeskComputer-Aided Design (CAD)Fusion 360Mechanical EngineeringModeling
공유 가능한 수료증
완료 시 수료증 획득
100% 온라인
지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.
다음 특화 과정의 4개 강좌 중 2번째 강좌:
유동적 마감일
일정에 따라 마감일을 재설정합니다.
고급 단계
완료하는 데 약 23시간 필요
영어
자막: 영어

강사

제공자:

Autodesk 로고

Autodesk

강의 계획 - 이 강좌에서 배울 내용

1

1

완료하는 데 6시간 필요

The Basics of Modeling

완료하는 데 6시간 필요
21개 동영상 (총 126분), 7 개의 읽기 자료, 2 개의 테스트
21개의 동영상
Get the software2m
Week 1 overview40
Project Overview13m
Creating parameters11m
Linking parameters and dimensions6m
Using symmetry and construction geometry11m
Sketch visibility options for quick updates3m
Creating construction planes7m
Creating extruded features11m
Create extruded cuts11m
Projecting edges vs. including them7m
Creating a revolved solid10m
Using Boundary Fill4m
Creating Sheet Metal Parts11m
Practice exercise 1 overview22
Practice exercise 1 solution3m
Practice exercise 2 overview20
Practice exercise 2 solution3m
Practice exercise 3 overview15
Practice exercise 3 solution3m
7개의 읽기 자료
The Basics of Modeling resources5m
About the discussion forum10m
Online learning communities and social media10m
Practice exercise 1 instructions30m
Practice exercise 2 instructions30m
Practice exercise 3 instructions30m
Week 1 Challenge exercise1시간 30분
2개 연습문제
Pre-course questions5m
Week 1 quiz30m
2

2

완료하는 데 5시간 필요

The Basics of Assemblies

완료하는 데 5시간 필요
21개 동영상 (총 107분), 5 개의 읽기 자료, 1 개의 테스트
21개의 동영상
The different ways to create components9m
Using scripts to create gears8m
Component color swatch and color cycling4m
Using McMaster-Carr parts in a design8m
Copy paste and paste new7m
Distributed designs8m
Derived Designs5m
Creating as-built joints4m
Creating joints8m
Joint origins and midplane joints8m
Driving joints and motion studies4m
Interference detection and contact sets5m
Isolation and opacity control6m
Creating groups and organizing a timeline4m
Practice exercise 1 overview23
Practice exercise 1 solution1m
Practice exercise 2 overview19
Practice exercise 2 solution5m
Practice exercise 3 overview27
Practice exercise 3 solution4m
5개의 읽기 자료
The Basics of Assemblies resources5m
Practice exercise 1 instructions30m
Practice exercise 2 instructions30m
Practice exercise 3 instructions30m
Week 2 challenge exercise1시간 30분
1개 연습문제
Week 2 quiz
3

3

완료하는 데 5시간 필요

Exploring Design Tools for Production

완료하는 데 5시간 필요
17개 동영상 (총 90분), 5 개의 읽기 자료, 1 개의 테스트
17개의 동영상
Creating draft during a feature6m
Creating draft as a feature10m
Adding ribs and plastic supports7m
Analyzing draft on a design11m
Creating holes and threads6m
Using a coil feature6m
Mirrors and patterns8m
Surface creation for complex geometry9m
Using surfaces to replace faces3m
Using surfaces to split bodies and faces4m
Practice exercise 1 overview20
Practice exercise 1 solution5m
Practice exercise 2 overview20
Practice exercise 2 solution3m
Practice exercise 3 overview19
Practice exercise 3 solution5m
5개의 읽기 자료
Exploring Design Tools for Production resources5m
Practice exercise 1 instructions30m
Practice exercise 2 instructions30m
Practice exercise 3 instructions30m
Week 3 challenge exercise1시간 30분
1개 연습문제
Week 3 quiz30m
4

4

완료하는 데 6시간 필요

Creating complex designs with form tools

완료하는 데 6시간 필요
17개 동영상 (총 71분), 5 개의 읽기 자료, 3 개의 테스트
17개의 동영상
Introduction to forms4m
Creating a form primitive4m
Adding or removing symmetry3m
Manipulating faces, edges, and vertices6m
Converting BREP faces to forms7m
Creasing or uncreasing an edge8m
Inserting edges and subdivisions8m
Repairs and modifications6m
Adding a bevel5m
Working with a form as a BREP7m
Practice exercise 1 overview24
Practice exercise 1 solution1m
Practice exercise 2 overview17
Practice exercise 2 solution1m
Practice exercise 3 overview28
Practice exercise 3 instructions2m
5개의 읽기 자료
Creating complex designs with form tools resources10m
Practice exercise 1 overview30m
Practice exercise 2 instructions30m
Practice exercise 3 instructions30m
Week 4 challenge assignment1시간 30분
2개 연습문제
Week 4 quiz30m
Course assessment30m

검토

MODELING AND DESIGN FOR MECHANICAL ENGINEERS WITH AUTODESK FUSION 360의 최상위 리뷰

모든 리뷰 보기

Autodesk CAD/CAM/CAE for Mechanical Engineering 특화 과정 정보

The demand placed on today’s engineers goes above and beyond the job description. Products have become complex and engineers are more frequently asked to leave specialized roles and to take on a wide variety of tasks that are beyond their traditional responsibilities. These tasks are centered on form, fit, and function. Engineers need to factor in broader concerns such as cost, procurement, sustainability, manufacturability, and serviceability. Their role has moved away from an individual responsibility to working as part of a collaborative engineering team, executing tradeoffs with both engineering and business stakeholders to meet project goals. These trends have forced today’s engineers to broaden their skillset to be successful. Engineers today are required to be on the cutting edge of design innovation. This means not only understanding engineering principles that govern the title and role, but also perfecting the toolsets needed to design and develop products. Through this specialization, you’ll learn the foundations of applying computer aided design (CAD), computer aided engineering (CAE), and manufacturing principles while developing your technical skills within Autodesk Fusion 360....
Autodesk CAD/CAM/CAE for Mechanical Engineering

자주 묻는 질문

  • Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:

    • The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.

    • The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.

  • When you enroll in the course, you get access to all of the courses in the Specialization, and you earn a certificate when you complete the work. Your electronic Certificate will be added to your Accomplishments page - from there, you can print your Certificate or add it to your LinkedIn profile. If you only want to read and view the course content, you can audit the course for free.

  • If you subscribed, you get a 7-day free trial during which you can cancel at no penalty. After that, we don’t give refunds, but you can cancel your subscription at any time. See our full refund policy.

  • Yes, Coursera provides financial aid to learners who cannot afford the fee. Apply for it by clicking on the Financial Aid link beneath the "Enroll" button on the left. You'll be prompted to complete an application and will be notified if you are approved. You'll need to complete this step for each course in the Specialization, including the Capstone Project. Learn more.

  • Visit this page to learn how to download Fusion 360 and to learn about the Autodesk Education license terms.

  • Professionals can purchase an annual or monthly commercial subscription to Fusion 360. For more information, visit the Fusion 360 subscribe page.

    Fusion 360 is also available for free to all users as a 30-day trial.

  • Yes! You'll earn a Course Certificate from Coursera and Autodesk upon completing this course, including all graded assignments.

    If you'd like to earn additional recognition from Autodesk, consider enrolling in Autodesk CAD/CAM/CAE for Mechanical Engineering.

  • Fusion 360 is both Mac and PC compatible. System requirements can be found here.

  • Installation support for Fusion 360 can be found in the Autodesk Knowledge Network.

  • The Autodesk Fusion 360 gallery is a great resource for design inspiration. With Fusion 360, file sharing is easy. Follow the instructions for sharing a file in Fusion 360 and share your design in the gallery.

    Instructions.

    Gallery.

  • The Autodesk Certified User program offers students an opportunity to validate their Fusion 360 skills to prepare for professional careers in design and engineering. The certification exam is offered through 14,000 Certiport Testing Centers, and is available to students, educators, and professionals. To learn more about the Autodesk Certified user certification, visit www.certiport.com/acu.

  • If you are ready to learn new skills, build important relationships, and gain practical experience, then it’s time to embark on your path to becoming an Autodesk Student Expert. Start by entering the Student Expert Orientation.

  • Yes, you do have the option to audit the courses in this specialization, subject to Coursera's terms. Please note you must audit each course individually.

    When you audit a course: You'll be able to see most of the course materials for free, but you won't be able to submit assignments or get grades for your work. You won't be able to submit assignments for feedback or a grade. You also won't get a Course or Specialization Certificate.

    Visit the Coursera Help Center to learn more about auditing a course.

궁금한 점이 더 있으신가요? 학습자 도움말 센터를 방문해 보세요.