About this Course
최근 조회 7,838

다음 전문 분야의 4개 강좌 중 3번째 강좌:

100% 온라인

지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.

유동적 마감일

일정에 따라 마감일을 재설정합니다.

초급 단계

완료하는 데 약 6시간 필요

권장: 10 hours/week...

영어

자막: 영어

귀하가 습득할 기술

StatisticsBinomial DistributionData AnalysisCausality

다음 전문 분야의 4개 강좌 중 3번째 강좌:

100% 온라인

지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.

유동적 마감일

일정에 따라 마감일을 재설정합니다.

초급 단계

완료하는 데 약 6시간 필요

권장: 10 hours/week...

영어

자막: 영어

강의 계획 - 이 강좌에서 배울 내용

1
완료하는 데 1시간 필요

Measurement System Analysis

Welcome to Six Sigma Tools for Analyze! This is the third course in the Six Sigma Yellow Belt Specialization. Your team of instructors, Dr. Bill Bailey, Dr. David Cook, Dr. Christine Scherrer, and Dr. Gregory Wiles, currently work in the College of Engineering and Engineering Technology at Kennesaw State University. This module will introduce you to Measurement System Analysis (MSA) which is a key component of the Measure phase of the DMAIC process. You will also learn about Gauge Repeatability & Reproducibility (GR&R) and why it is used in the measurement phase.

...
2 videos (Total 10 min), 3 readings, 2 quizzes
2개의 동영상
Measurement System Analysis Part 24m
3개의 읽기 자료
Highly-Recommended Text1m
Measurement System Analysis - Recommended Reading3m
Gage Repeatability & Reproducibility - Recommended Reading10m
2개 연습문제
Measurement System Analysis Practice20m
Measurement System Analysis Practice Graded Quiz16m
2
완료하는 데 2시간 필요

Process Analysis Tools

This module will introduce you to the Analysis phase of the DMAIC process. Process analysis helps you to better understand current processes and how they can be improved. You will be introduced to many of the different process analysis tools that are commonly used by Six Sigma experts. Failure Mode and Effects Analysis (FMEA) will also be introduced to help you better understand how to identify process failures.

...
6 videos (Total 29 min), 4 readings, 2 quizzes
6개의 동영상
Eliminating Waste4m
5S4m
FMEA Part 15m
FMEA Part 25m
FMEA Part 36m
4개의 읽기 자료
Eliminating Waste and 5S - Recommended Reading10m
FMEA Pt. 1 - Recommended Reading5m
FMEA Pt. 2 - Recommended Reading10m
FMEA Gift - Recommended Reading20m
2개 연습문제
Process Analysis Tools Practice20m
Process Analysis Tools8m
3
완료하는 데 1시간 필요

Root Cause Analysis

Root cause analysis is a common problem solving step. Determining the root cause of something is an important aspect of uncovering the causes of a problem. In this module you will review the different tools used in determining root cause including 5-whys, process mapping, force-field analysis, and matrix charts.

...
5 videos (Total 21 min), 4 readings, 2 quizzes
5개의 동영상
5 Whys4m
Process Mapping3m
Force Field Analysis4m
Matrix Charts7m
4개의 읽기 자료
5 Whys - Recommended Reading5m
Process Mapping - Recommended Reading15m
Force Field Analysis - Recommended Reading2m
Matrix Charts - Recommended Reading5m
2개 연습문제
Root Cause Analysis Practice20m
Root Cause Analysis Graded Quiz10m
4
완료하는 데 2시간 필요

Data Analysis

In this module you will be diving into the statistical side of Six Sigma. You will begin with learning about the basic distribution types which include normal and binomial. You will then proceed to variation and will learn the difference between common and special cause variation.

...
7 videos (Total 23 min), 4 readings, 2 quizzes
7개의 동영상
Calculating Probabilities Using the Normal Distribution4m
Calculating Probabilities in the Normal Distribution: Example Problems3m
The Binomial Distribution2m
Binomial Distribution Calculations3m
Binomial Distribution Calculations: More Examples3m
Common Versus Special Cause Variation2m
4개의 읽기 자료
Characteristics of Probability Distributions - Recommended Reading20m
The Normal Distribution Table10m
The Binomial Distribution - Recommended Reading10m
Common Versus Special Cause Variation - Recommended Reading15m
2개 연습문제
Data Analysis Practice Quiz40m
Data Analysis Graded Quiz30m
4.7
26개의 리뷰Chevron Right

40%

이 강좌를 수료한 후 새로운 경력 시작하기

33%

이 강좌를 통해 확실한 경력상 이점 얻기

Six Sigma Tools for Analyze의 최상위 리뷰

대학: ETOct 16th 2018

I enjoy the clear presentations of the lecturers. The lecture slides are extremely helpful. The lectures compliment very well the ideas mentioned in the textbook.

대학: ELApr 27th 2018

Easy to comprehend. It provides a gist of the handbook without omitting essential information.

강사

Avatar

Christina Scherrer, PhD

Professor of Industrial Engineering
Department of Systems and Industrial Engineering
Avatar

David Cook, PhD

Assistant Professor of Mechanical Engineering Technology
Department of Mechanical Engineering Technology
Avatar

Gregory Wiles, PhD

Interim Chair and Assistant Professor
Department of Systems and Industrial Engineering
Avatar

Bill Bailey, PhD

Assistant Professor of Industrial Engineering
Department of Systems and Industrial Engineering

조지아주립대 시스템 정보

The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System....

Six Sigma Yellow Belt 전문 분야 정보

This specialization is for you if you are looking to learn more about Six Sigma or refresh your knowledge of the basic components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance. In this specialization, you will learn proven principles and tools specific to six sigma and lean. This is a sequential, linear designed specialization that covers the introductory level content (at the "yellow belt" level) of Six Sigma and Lean. Yellow Belt knowledge is needed before advancing to Green Belt (which is a second specialization offered here on Coursera by the USG). Green Belt knowledge is needed before moving to a Black Belt. The proper sequence of this specialization is: Course #1 - Six Sigma Fundamentals Course #2 - Six Sigma Tools for Define and Measure Course #3 - Six Sigma Tools for Analyze Course #4 - Six Sigma Tools for Improve and Control At the end of Course #4 (Six Sigma Tools for Improve and Control), there is a peer-reviewed, capstone project. Successful completion of this project is necessary for full completion of this specialization. It should be noted that completing either the Yellow Belt or Green Belt Specializations does not give the learner "professional accreditation" in Six Sigma. However, successful completion will assist in better preparation for such professional accreditation testing....
Six Sigma Yellow Belt

자주 묻는 질문

  • 강좌에 등록하면 바로 모든 비디오, 테스트 및 프로그래밍 과제(해당하는 경우)에 접근할 수 있습니다. 상호 첨삭 과제는 이 세션이 시작된 경우에만 제출하고 검토할 수 있습니다. 강좌를 구매하지 않고 살펴보기만 하면 특정 과제에 접근하지 못할 수 있습니다.

  • 강좌를 등록하면 전문 분야의 모든 강좌에 접근할 수 있고 강좌를 완료하면 수료증을 취득할 수 있습니다. 전자 수료증이 성취도 페이지에 추가되며 해당 페이지에서 수료증을 인쇄하거나 LinkedIn 프로필에 수료증을 추가할 수 있습니다. 강좌 내용만 읽고 살펴보려면 해당 강좌를 무료로 청강할 수 있습니다.

  • Our applied curriculum is built around the latest handbook The Certified Six Sigma Handbook (2nd edition) and students will develop /learn the fundamentals of Six Sigma. Registration includes online access to all course content, projects, and resources. This price does not include the companion text The Certified Six Sigma Handbook (2nd edition).

궁금한 점이 더 있으신가요? 학습자 도움말 센터를 방문해 보세요.