이 강좌에 대하여

최근 조회 92,221
100% 온라인
지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.
유동적 마감일
일정에 따라 마감일을 재설정합니다.
중급 단계
완료하는 데 약 12시간 필요
영어
자막: 영어
100% 온라인
지금 바로 시작해 나만의 일정에 따라 학습을 진행하세요.
유동적 마감일
일정에 따라 마감일을 재설정합니다.
중급 단계
완료하는 데 약 12시간 필요
영어
자막: 영어

제공자:

맨체스터 대학교    로고

맨체스터 대학교

강의 계획 - 이 강좌에서 배울 내용

1

1

완료하는 데 3시간 필요

Week 1: Principles of Corrosion

완료하는 데 3시간 필요
44개 동영상 (총 172분)
44개의 동영상
Introduction and learning outcomes2m
Rusting of steel3m
Introduction to corrosion – Ecorr8m
A career in corrosion control9m
Introduction and learning outcomes1m
EFC Design11m
Types of corrosion11m
Introduction and learning outcomes1m
Corrosion matters3m
Mechanical properties of materials8m
Corrosion of zinc9m
Introduction and learning outcomes1m
Forth Bridge3m
I-35W_bridge5m
Aloha 2438m
Introduction59
Video of steel polarisation2m
Reactions on an Iron Electrode1m
Conductivity and circuits2m
Chemistry of a Al/Cu battery3m
Potential distribution in the electrolyte and wire4m
Corrosion Cells2m
Galvanic Cells3m
Galvanic Corrosion: Reactivity series3m
Galvanic Corrosion: Bimetallic corrosion5m
Measurement of Corrosion: Three electrode cell3m
Measurement of Corrosion: Evans Diagrams6m
Measurement of Corrosion: Faraday’s Law2m
Measurement of Corrosion: Linear Polarisation Resistance5m
Measurement of Corrosion: Practical LPR5m
Introduction to Passivity1m
Faraday experiment2m
Thermodynamics5m
Kinetics6m
Passivity: Summary2m
Introduction53
Aesthetic1m
Erosion impeller1m
Flow erosion1m
Hydrogen cracking1m
Pitting-crevice1m
Kipper1m
Rusticle1m
5개 연습문제
1.15m
1.25m
1.35m
1.4
1.5
2

2

완료하는 데 2시간 필요

Week 2: Cathodic Protection

완료하는 데 2시간 필요
7개 동영상 (총 102분)
7개의 동영상
Introduction to Cathodic Protection9m
Basic Principles of Cathodic Protection20m
Practical Aspects of Cathodic Protection24m
Design of Cathodic Protection Systems17m
Potential Decay and Current Drain Test12m
Cathodic Protection of Reinforced Concrete Structures15m
6개 연습문제
2.1
2.2
2.3
2.4
2.5
2.6
3

3

완료하는 데 2시간 필요

Week 3: Surface Engineering

완료하는 데 2시간 필요
6개 동영상 (총 126분)
6개의 동영상
Surface Engineering for corrosion protection21m
Surface Engineering Techniques Part 134m
Surface Engineering Techniques Part 227m
Surface Engineering Techniques Part 326m
Coating Performance and Industrial Challenge13m
5개 연습문제
3.1
3.2
3.3
3.4
3.5
4

4

완료하는 데 5시간 필요

Week 4: Oilfield Corrosion and Control

완료하는 데 5시간 필요
19개 동영상 (총 199분)
19개의 동영상
Introducing Oil and Gas10m
Oil and Gas Reservoirs8m
Oil and Gas Composition13m
Oil and Gas Production11m
Activities and Equipment in the Oil and Gas Industry12m
Common Oilfield Materials8m
Oilfield Corrosion and Other Issues13m
Impact of Fluid Flow11m
Scales and Deposits10m
Sweet and Sour Corrosion12m
Sour Corrosion10m
Sweet and Sour Corrosion Prediction12m
Oilfield Corrosion Control11m
Corrosion Inhibition13m
Corrosion Inhibitor Selection/Deployment15m
Oilfield Corrosion Management, Monitoring and Inspection7m
Corrosion Monitoring7m
Corrosion Inspection6m
6개 연습문제
Session 115m
Session 218m
Session 315m
Session 418m
Session 518m
Session 6

검토

PROTECTING THE WORLD: INTRODUCING CORROSION SCIENCE AND ENGINEERING의 최상위 리뷰

모든 리뷰 보기

자주 묻는 질문

  • Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:

    • The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.

    • The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.

궁금한 점이 더 있으신가요? 학습자 도움말 센터를 방문해 보세요.