Chevron Left
Introduction to FPGA Design for Embedded Systems(으)로 돌아가기

콜로라도 대학교 볼더 캠퍼스의 Introduction to FPGA Design for Embedded Systems 학습자 리뷰 및 피드백

4.6
별점
981개의 평가
241개의 리뷰

강좌 소개

This course can also be taken for academic credit as ECEA 5360, part of CU Boulder’s Master of Science in Electrical Engineering degree. Programmable Logic has become more and more common as a core technology used to build electronic systems. By integrating soft-core or hardcore processors, these devices have become complete systems on a chip, steadily displacing general purpose processors and ASICs. In particular, high performance systems are now almost always implemented with FPGAs. This course will give you the foundation for FPGA design in Embedded Systems along with practical design skills. You will learn what an FPGA is and how this technology was developed, how to select the best FPGA architecture for a given application, how to use state of the art software tools for FPGA development, and solve critical digital design problems using FPGAs. You use FPGA development tools to complete several example designs, including a custom processor. If you are thinking of a career in Electronics Design or an engineer looking at a career change, this is a great course to enhance your career opportunities. Hardware Requirements: You must have access to computer resources to run the development tools, a PC running either Windows 7, 8, or 10 or a recent Linux OS which must be RHEL 6.5 or CentOS Linux 6.5 or later. Either Linux OS could be run as a virtual machine under Windows 8 or 10. The tools do not run on Apple Mac computers. Whatever the OS, the computer must have at least 8 GB of RAM. Most new laptops will have this, or it may be possible to upgrade the memory....

최상위 리뷰

KS
2020년 7월 30일

This is an extremely good course and I learned a lot. Thank you very much sir "Timothy Scherr " and all the people who make this a such a nice one. Also thank you very much "COURSERA" !!!

PM
2020년 11월 5일

This course is very basic level and I encourage all the electronics students must take this course. Thank you Timothy Scherr Sir, he explained all the concepts with detailed explanation.

필터링 기준:

Introduction to FPGA Design for Embedded Systems의 243개 리뷰 중 226~243

교육 기관: Sushrut M S

2020년 6월 6일

Nice and informative.

교육 기관: Akshay

2021년 2월 16일

Really good course.

교육 기관: WU-TE Y

2020년 7월 5일

It's good lecture!

교육 기관: Laxman N

2020년 8월 24일

Very helpful

교육 기관: ALAPATI S H

2020년 1월 20일

good

교육 기관: Molly S

2020년 5월 27일

I took an FPGA course in college and wanted to refresh my knowledge. This course did a nice job of introducing the FPGA Quartus software and some basic knowledge about FPGAs. However, the FPGA jargon is overwhelming. To an experienced engineer, it sounds normal, but to new students, it's too difficult to keep up with.

Week 3 was not helpful. No one wants to sit and read datasheets, much less listen to someone else read datasheets (no offense to Dr. Scherr!). Week 3's content would have been better suited to a project format. For example, each student researches an FPGA of their choice (from a instructor chosen selection), then discusses/shares their information with the discussion board. Sort of like the Jigsaw Method teaching style.

I do appreciate taking this class and feel that it has helped me gain a foundation in FPGA. Thank you for your course!

교육 기관: Samuel C

2020년 6월 5일

Overall a pretty gentle introduction into FPGA design. The course gives a good overview of the FPGA workflow with practical examples. However, the assessments emphasize quite a bit of rote memorization rather than logical learning. I would recommend future revisions to course material to more heavily emphasize the digital logic constructs fundamental to FPGA design rather than discussion of commercial products.

교육 기관: Parikshit K C

2018년 7월 16일

Good overview however not very exciting. One week seemed to be dedicated to almost reading out spec/selection guides of FPGA and it sounded monotonous. Week 4 was much more involving and took more than usual time to finish. There was a mentioned 3 more specializations but didn't hear what those are and when those will start.

교육 기관: Yosi L

2020년 5월 7일

not very good for beginners.

First week was good, from second week on shows a lot of details without explaining the motivation behind them which makes the course really boring.

Dropped the course.

교육 기관: HRISHIKESH P

2020년 9월 7일

The first 3 weeks were excellent. Instead of designing NIOS 2 processor in week 4 could develop pipemult from the scratch right by developing each block instead of providing ready-made blocks.

교육 기관: KARTHIK R

2020년 7월 2일

Received minimal support for issues that came up during the course. I think the instructors need to be active in resolving issues that may come up during installation and execution.

교육 기관: LAKSHMI D

2020년 3월 12일

I would learn many thing about "Introduction to FPGA Design for Embedded Systems" from this course

교육 기관: Ammar A K

2019년 3월 13일

There should be more examples of how to practically code and run FPGA using VHDL

교육 기관: Sakshat R

2020년 5월 22일

Good theory, decent project work

교육 기관: KARAN V

2020년 5월 2일

IT WAS FUN

교육 기관: Joynul A

2021년 1월 26일

It's too hard to complete

교육 기관: Tarek M A M

2021년 1월 25일

Very Advanced and brief

교육 기관: Marco M

2019년 10월 12일

very bad explanation.